Malt Muncher - 3 Roller Grain Mill
  • Malt Muncher - 3 Roller Grain Mill

    SKU: KL03261

    The Malt Muncher 3 Roller Grain Mill is specifically designed to give that extra crush when passing through. If you're after bigger grain hopper capacity and the ability to double crush to your exact specifications then this is perfect for you.


    Many have argued over the years that two rollers may be good but three is better! 


    With approximate 5.5kg of hopper space, this large and in charge Malt Muncher will get through your bill lickity split.


    Just like the 2 Roller the 3 Roller has an adjustable roller, but only the third bottom one that does that refined crushing.

    Compatible with our High Torque Motor

    If you are going to be using a drill, don't go crazy with speed, you can risk cooking/burning your grain and impeding the mill's performance. If at all possible just enough power to get it going and catching. This should fall around the 200rpm mark.

    - Grain hopper;

    - Manual Crank handle;

    - 12mm crankshaft;

    - Roller adjustment knobs;

    - Reinforced chassis with pre-aligned mounting holes for perfect stability if mounting to a board;

    - 12 TPI knurl to efficiently pull grain through rollers while leaving the hull intact to form an excellent filter bed for sparging

    These units have been designed for Malted Barley, Wheat & Rye. We do not take returns for misuse outside of these parameters.

      • Facebook

      Contact Details:

      We are open on these days:

      Monday to  Friday: 10 am - 4:30 pm
      Sat: 10am - 1:30pm
      Sun: Closed


      Unit 57 / 14 Loyalty Road, North Rocks, NSW, 2151

      ©2021 by 41 pints of Beer.