CO2 GAS CYLINDERS 6KG (FULL)
- Australian Standard Approved
- Holds 6kg of CO2 when full
- Dimensions 71cm high x 16cm diameter
- Black carry handle grip for easy of transport and protection of valve
Please note this item cannot be sent with Australia Post. If you purchase this item and select Australia Post, it will automatically be changed to a suitable shipping carrier. We will contact you if further information is needed.
To download a copy of the MSDS for this product click on the link below:
CO2 Gas Cylinder MSDS PDF
To download a copy of the Work Cover Design Registration Approval Paperwork:
Work cover Registgration Paperwork for 2.6kg CO2 Cylinder
Prior to use
We strongly suggest testing your connections prior to leaving the cylinder on.
Disconnect the gas side of your set up from your kegs.
Turn on the gas at the black valve
Turn the grey regulator clockwise until the low pressure side reaches 40psi
Turn off the black valve at the top of the bottle.
Wait 2+ Hours (or leave overnight)
If the left and right pressure gauge on the regulator has dropped or is showing psi. Then it is safe to say you have a leak somewhere in the line. You will need to check all connections with soapy detergent water to locate the leak.
We recommend checking all clamped sections, or if you’re using push in fittings, to ensure they’re not bending or being stretched as this will cause a micro leak.