6 Output / 6 Way Manifold Gas Line Splitter with Check Valves (1/4" thread, MFL

These gas manifolds are rated to 100psi and include 6 gas line outputs and 6 x 1/4inch ball vales. We highly recommend using the duotight FFL x 8mm push-in fittings for these manifolds. As seen in the photos.

This unit can be turned into a 7 way manifold by adding a 1/4 inch ball valve.

You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly if you want to be able to easily disconnect/reconnect a gas line. Alternatively, you can also fit the Duotight 8mm to 1/4" push in fittings to this manifold. But this would defeat the purpose of having the check valve built-in, as well as having the ability to isolate each gas line.
Lastly, if you want to join multiple manifolds together you can do this using the stainless hex nipple

Please note that due to the check valve mechanism there is about a 2 psi pressure drop over the ball valves in these manifolds. You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg.